Make It Snappy (MIS) | April 1st @ 7 pm ET | Scrapping with Liz

If you have any questions let me know!

Instructions
Because the template is your choice, the only way I will know if you participated is if you link your layout in this thread. To qualify, post your layout to the gallery or hosting site of your choice* and then paste the image and link here by 8:15 pm ET tonight to qualify for the drawing and by 7:00 pm ET tomorrow to qualify for the free template. You can make your layout yours; add items and design as you like, as long as you follow the instructions below.

1. Have an odd number of photos.
2. Have an even number of patterned papers.
3. Have an odd number of solid papers.
4. Have an even number of fasteners (buttons, brads, tape, etc.).
5. Have an odd number of words in your title.

The Twist
For those that comment in this thread before the start of the challenge (posts 2-20), you can change the odd/even in one instruction.

*Posting Notice: To upload your layout into the TLP gallery it must follow TLP gallery posting requirements.
 
Fastest I've ever done a layout because that isn't a whole lot on it!

1. 1 photo
2. 4 patterned papers, each used at least twice
3. 3 solid papers, red, orange and green
4. 2 fasteners (stars)
5. 1 word title
Did not use twist.

Note: the title and the tornado behind it come from a kit from another store but everything else is TLP designers.

 
Fastest I've ever done a layout because that isn't a whole lot on it!

1. 1 photo
2. 4 patterned papers, each used at least twice
3. 3 solid papers, red, orange and green
4. 2 fasteners (stars)
5. 1 word title
Did not use twist.

Note: the title and the tornado behind it come from a kit from another store but everything else is TLP designers.

Yay for a speedy layout!
 
Here is my contribution!
Thank you for the fun inspiration!

1. odd : 5 photos
2. even : 2 patterned papers
twist 3. odd ---> even : 6 solid papers
4. even : 4 fasteners (2 buttons + 2 staples clusters)
5. odd : 1 word in title

 
Calling time! Will be back shortly with the winner.
 
The winner is.....

@mcurtt -- CONGRATS Marilyn! I will pm you your coupon for $10 to Liz's store later this week.

Part two is still open so keep those layouts coming! Post a link by 7 pm tomorrow and you will receive the free template!

All prizes with be sent by DM by 04/08/23. Have a great weekend everyone!
 
Just missed the deadline !
I used SWL_MIS_10_22 Template
1. Have an odd number of photos. = 3
2. Have an even number of patterned papers.changed to odd = 1
3. Have an odd number of solid papers. = 3
4. Have an even number of fasteners (buttons, brads, tape, etc.). = 2 buttons, 2 washi tape, 4 rows of stitches
5. Have an odd number of words in your title. = 7
 
The winner is.....

@mcurtt -- CONGRATS Marilyn! I will pm you your coupon for $10 to Liz's store later this week.

Part two is still open so keep those layouts coming! Post a link by 7 pm tomorrow and you will receive the free template!

All prizes with be sent by DM by 04/08/23. Have a great weekend everyone!
:circles:fairydance :byay

Thanks, Monica!
 
Our internet has been out all day...probably due to very high winds and lots of downed trees?!? So I'm just now popping in. Hope you guys had fun with this challenge & thanks to Monica for taking over the MIS!
 
The winner is.....

@mcurtt -- CONGRATS Marilyn! I will pm you your coupon for $10 to Liz's store later this week.

Part two is still open so keep those layouts coming! Post a link by 7 pm tomorrow and you will receive the free template!

All prizes with be sent by DM by 04/08/23. Have a great weekend everyone!

Big Congrats Marilyn!!
 
Congratulations Marilyn @mcurtt.
my page
odd number of photos - 1
even number of patterned papers - 2
odd number of solid papers - 3
even number of fasteners - 2
odd number of words in your title - 1

 
i haven't played along in so long and i forgot about signing up for the twist but i got a page done! i used SWL's Weekly Life 9 templates (maybe it was the house shaped paper pieces in the prize template that made me think home reno or it's just an ongoing thing in my brain and life so that influenced my page and the chevron kinda paper pieces in that Weekly Life template set made me think houses/roof lines in kids stick figure drawings anyway too

1. Have an odd number of photos. 3
2. Have an even number of patterned papers. 2 x woodgrain, red lined notepaper, camera paper
3. Have an odd number of solid papers. 1 the blueish backgrd
4. Have an even number of fasteners (buttons, brads, tape, etc.). - i kept adding more and then having an odd number so i ended up with 2 x stitching (on doily, and on top photo); 2 x staples (on smaller photos); 2 x flower centres; camera brad, green flair = 6
5. Have an odd number of words in your title. 3 words - crammed 2 different wordarts together to make 'renovation life captured'
plus several extra bits and bobs
 
Last edited:
Thank you Monica for this challenge !

1. odd number of photos 1
2. even number of patterned papers 2
3. odd number of solid papers 5
4. even number of fasteners 2
5. odd number of words in your title 1

 
Thanks for the challenge - here's my layout:



Template used: Frozen Leaves [retired]

1. 1 photo
2. 2 patterned papers
3. 3 solid papers (Journaling paper + leaves)
4. 8 fasteners (1 tape, 4 buttons, 3 sets of rings for the date)
5. 3 word title

Didn't use the twist
 

1. 3 photos
2. 6 different pattern papers (2 florals, 1 polka dot, 1 heart, 2 plaids)
3. 3 different solid papers (light blue background, pink, dark blue)
4. 4 different fasteners (three different stitches, 1 washi tape)
5. 3 words in title ("at the park")
 
This was fun... hard to stick to the instructions... but I think I did it.

1. Have an odd number of photos. - 3 pics
2. Have an even number of patterned papers. - used 4 - pink flowers, white mm, white/green flower, green dot
3. Have an odd number of solid papers. - used 3- black, teal, cream
4. Have an even number of fasteners (buttons, brads, tape, etc.). - used 4 - stitching, 2 staples, paperclip
5. Have an odd number of words in your title. - 3 words
No twist needed... at first I was using odd patterns and even solids so that didn't work... nearly used odd fasteners too... so once all paired back I actually stuck to the instructions... hehehe.
 
Back
Top